内插螺旋立式上行管流场及传热性能的实验研究

通过粒子图像测速流场实验与传热实验相结合，研究了内插螺旋立式上行管的螺旋节距、丝径、中径比等结构参数在不同Re下对流场、阻力及传热性能的影响。结果表明，内插螺旋能够有效扰动和混合管内流体，使管内形成多个纵向旋涡的流体结构、增大管壁附近液体涡量，有利于强化传热。当Re相同时，管内平均流速v、Nu和综合换热性能PEC均随丝径增大而增大，随中径比减小而增大；随节距增大，3种参数均出现增大的趋势，节距大于20 mm后开始减小。管内流体的阻力f随丝径和节距增大而减小，随中径比增大而增大。综合比较，在较低Re时，节距p=20 mm、丝径e=1.6 mm、中径比D/d=0.75时综合传热效果最好。     

Flow Cytometry: From Experimental Design to Its Application in the Diagnosis and Monitoring of Respiratory Diseases

Recent advances in the field of flow cytometry (FCM) have highlighted the importance of incorporating it as a basic analysis tool in laboratories. FCM not only allows the identification of cell subpopulations by detecting the expression of molecules in the cell membrane or cytoplasm, but it can also quantify and identify soluble molecules. The proper functioning of the FCM requires six fundamental systems, from those related to the transport of events to the systems dedicated to the analysis of information. In this review, we have identified the main considerations that every FCM user must know for an optimal antibody panel design, the quality systems that must govern the FCM protocols to guarantee reproducible results in research or clinical laboratories. Finally, we have introduced the current evidence that highlights the relevance of FCM in the investigation and clinical diagnosis of respiratory diseases, establishing important advances in the basic and clinical study of diseases as old as Tuberculosis along with the recent proposals for the monitoring and classification of patients infected with the new SARS-CoV2 virus.     

On optical flow techniques applied to breaking surges

Surface wave breaking is a challenging two-phase flow process which plays an important role in numerous physical processes. A highly-turbulent unsteady breaking surge was investigated experimentally in a large facility, and substantial aeration occurred in the roller. The application of three optical flow techniques (Lucas-Kanade, Horn-Schunck and Farnback) to the air-water region was tested. The results indicated that the Farnback technique provided most accurate results, although some misleading results could be obtained near the air-water boundaries of the roller. The bore generation by a rapid gate closure showed a highly-unsteady complicated velocity field, with substantial free-surface deformations, wave breaking and formation of large coherent structures before the surge detached from the gate. Further upstream, the surge propagated as a hydraulic jump in translation and the data showed a marked shear region with a recirculation zone above, showing air-water flow features comparable to stationary hydraulic jumps. The upper and lower bounds of air-water flow region yielded data implying an air-to-water velocity ratio about 4–5 for a Froude number Fr₁ = 2.1.     

A newly-developed wide range molecular flow meter based on AAO leak element

An innovate constant volume flow meter (ICVFM) using AAO leak element was developed, and then applied to measure the pumping speed of dry vacuum pumps. The AAO leak element was calibrated with dynamic differential pressure decay method. The results imply that the conductance of AAO leak is inversely proportional to the square root of the molecular mass, and remains unchanged with pressure varying from vacuum to atmosphere. Then the pumping speed was measured by a simple test system. In the end, the uncertainties of calibrating AAO leak element and measuring pumping speed were considered to confirm the measurement capability. The newly developed flow meter enables flow measurements at pressures ranging from vacuum through atmospheric pressure, which has potential application in the semiconductor industry.     

Comparison of throttle devices to measure two-phase flowrates of wet gas with extremely-low liquid loading

The online measurement of wet gas with extremely-low liquid loading (Lockhart-Martinelli parameter lower than 0.02) remains a challenge. In this study, three types of throttle devices, Venturi, orifice plate and cone, are compared experimentally with air-water two-phase flow in a horizontal pipe of inner diameter of 50 mm. High-precision correlations are established to measure the gas and liquid flowrates via a single throttle device. Results show that the two-phase mass flow coefficient (K) of the three throttle devices all increase linearly with the liquid densiometric Froude number and the K correlations are established respectively to correct the gas mass flowrate deviation. The pressure loss ratio (δ) for Venturi is sensitive and monotonous to the liquid loading, which contributes to the high accuracy of liquid flowrate measurement. By incorporating the K correlations, both the gas and liquid mass flowrates can be predicted precisely. The relative error of the gas mass flowrate predicted by the Venturi is within ±2.0% at 95% confidence level, and that of the liquid mass flowrate is within ±15% at 90% confidence level.     

The control of paracetamol particle size and surface morphology through crystallisation in a spray dryer

The parameters governing the crystallisation of paracetamol using various conventional techniques has been extensively studied, however the factors influencing the drug crystallisation using spray drying is not as well understood. The aim of this work was to investigate the crystallisation of an active pharmaceutical ingredient through evaporative crystallisation using a spray dryer to study the physicochemical properties of the drug and to use semi-empirical equations to gain insight into the morphology and particle size of the dried powder. Paracetamol solutions were spray dried at various inlet temperatures ranging from 60 °C to 120 °C and also from a series of inlet feed solvent compositions ranging from 50/50% v/v ethanol/water to 100% ethanol and solid-state characterisation was done. The size and morphology of the dried materials were altered with a change in spray drying parameters, with an increase in inlet temperature leading to an increase in particle Sauter mean diameter (from 3.0 to 4.4 µm) and a decrease in the particle size with an increase in ethanol concentration in the feed (from 4.6 to 4.4 µm) as a result of changes in particle density and atomised droplet size. The morphology of the dried particles consisted of agglomerates of individual crystallites bound together into larger semi-spherical agglomerates with a higher tendency for particles having crystalline ridges to form at higher ethanol concentrations of the feed.     

Adaptive neuro-fuzzy algorithm applied to predict and control multi-phase flow rates through wellhead chokes

A Takagi-Sugeno adaptive neuro-fuzzy inference system (TSFIS) model is developed and applied to a dataset of wellhead flow-test data for the Resalat oil field located offshore southern Iran, the objective is to assist in the prediction and control of multi-phase flow rates of oil and gas through the wellhead chokes. For this purpose, 182 test data points (Appendix 1) related to the Resalat field are evaluated. In order to predict production flow rate (Q_L) expressed as stock-tank barrels per day (STB/D), this dataset includes four selected input variables: upstream pressure (Pwh); wellhead choke sizes (D64); gas to liquid ratio (GLR); and, base solids and water including some water-soluble oil emulsion (BS&W). The test data points evaluated include a wide range of oil flow rate conditions and values for the four input variables recorded. The TSFIS algorithm applied involves five data processing steps: a) pre-processing, b) fuzzification, c) rules base and adaptive neuro-fuzzy inference engine, d) defuzzification, and e) post-processing of the fuzzy model. The developed TSFIS model for the Resalat oil field database predicted oil flow rate to a high degree of accuracy (root mean square error = 247 STB/D, correlation coefficient = 0.9987), which improves substantially on the commonly used empirical algorithms used for such predictions. TSFIS can potentially be applied in wellhead choke fuzzy controllers to stabilize flow in specific wells based on real-time input data records.     

基于修正幂律模型流体的柳叶形扶正器旋流规律及应用

为提高注水泥过程中水泥浆顶替效率，国内外愈来愈多地使用旋流扶正器。但是，目前旋流扶正器结构参数主要靠经验设计，缺乏理论基础也没有相关行业标准。针对依据文丘里效应设计的柳叶形旋流扶正器，基于修正幂律流体模型，构建了旋流扶正器旋流长度计算模型。通过数值模拟对旋流扶正器井下旋流规律进行研究，推导出了旋流扶正器在修正幂律流体条件下，周向平均速度和完全顶替的临界速度公式。基于旋流扶正器井下旋流规律，分析了井眼环空结构、流体性能、井下井壁附着力对水泥浆顶替效率的影响，优化了柳叶形旋流扶正器旋流角、扶正棱长度、扶正棱有效体积和扶正器高度等设计参数。对比分析了柳叶形与常规旋流扶正器在不同工况下的旋流长度，柳叶形扶正器的旋流长度比常规扇形平均提升了32%，比常规梯形扶正器平均提升了47%。柳叶形扶正器在新疆顺北油田顺北3井等20多井次超深井应用，应用井固井质量明显优于常规扇形的旋流扶正器。     

Fluid flow and heat transfer with nail dipping method in mould during continuous casting process

ABSTRACT

The character and cause of sliver defect on IF steel sheet surface are studied by means of SEM, unstable flow in mould could induce surface velocity and level fluctuations, leading to surface defects during continuous casting of steel. The nozzle clogging is a serious problem during the continuous casting of steel, due to its influence on the casting operations and products quality. In this study, the nail dipping method for measuring surface velocity and flow direction in molten steel were employed. The fluid flow in mould of whole casting sequence was investigated, especially during the nozzle clogging conditions. The results showed that when nozzle clogging occurred in the 7th heat, the flow velocities on R and L side of nozzle were 0.280 and 0.402?m/s, respectively. The surface defect ratio of hot-rolled and cold-rolled plates increases with the increase of heat flux deviation on both sides of the mould copper. The different clogging per cent on both sides of the nozzle will lead to asymmetry flow, the surface velocity is higher with the small clogging per cent side compared to that of relatively large per cent clogging side.     

大方坯结晶器电磁搅拌器结构优化

为改善连铸结晶器内钢液的流动状况，采用有限元法和有限容积法研究了大方坯结晶器电磁搅拌器结构对连铸结晶器内电磁场、流场和温度场分布的影响。结果表明，新型结晶器电磁搅拌器在400 A、3 Hz时产生的电磁力比传统结晶器电磁搅拌器在500 A、3 Hz时产生的电磁力更加均匀，对结晶器内钢液的扰动更强，可提高结晶器内的传热效率，有助于初始凝固坯壳和等轴晶的形成，改善方坯质量。